Orion-instruments Eclipse 705 Manual de usuario descargar pdf (Pagina 5)

1.1.2 Configuration Information

Some key information is needed to configure the

ECLIPSE transmitter. Complete the following operating

parameters table before beginning configuration.

Display Question Answer

Probe Model What probe model is listed on the

model information?

(first four digits of probe model number) _____________

Probe Mount Is the probe mounted NPT, BSP,

or flange? _____________

Measurement What is the desired measurement? Choices

Type are: Level only, volume, interface level

or interface level and volume. _____________

Level Units What units of measurement will be

used? (inches, centimeters, feet or meters)

(AI block parameter. Not selectable at

transmitter on Model 705 Fieldbus)

_____________

Probe Length What probe length is listed on the

model information? _____________

Level Offset The desired level reading when the

liquid is at the end of the probe. _____________

Dielectric What is the dielectric constant range

of the process medium? (Upper layer

dielectric for interface applications) _____________

Loop Control Is the output current to be controlled

by level or volume? _____________

Set 4.0 mA What is the 0% reference point for the

4.0 mA value? (EU_0 value for

OUNDATION fieldbus) _____________

Set 20.0 mA What is the 100% reference point for

the 20.0 mA value? (EU_100 value for

OUNDATION fieldbus) _____________

(Top 6" (152 mm) of Single Rod probes is within

Blocking Distance)

1.2 QuickStart Mounting

NOTE: Confirm the configuration style and process connection

size/type of the ECLIPSE transmitter. Ensure it matches the

requirements of the installation before continuing with the

QuickStart installation.

 Confirm the model and serial numbers on the nameplates

of the ECLIPSE probe and transmitter are identical.

NOTE: For applications using the Model 7xS steam probe, it is manda-

tory to keep the transmitter and probe matched as a set.

1.2.1 Probe

 Carefully place the probe into the vessel. Align the probe

process connection with the threaded or flanged mounting

on the vessel.

















57-600 Eclipse

Guided Wave Radar Transmitter

1 2 3 4 5 6 7 8 9 10 ... 67 68

Comentarios a estos manuales

Sin comentarios

Orion-instruments Eclipse 705 Manual de usuario Pagina 5

Comentarios a estos manuales